Epoxy, Polyester and Adhesives

3M 4200 A one-part general purpose PU with a good adhesion to wood fiberglass gelcoat plastics and metals. Highlights HIGH-PERFORMANCE SEALING: ...

Great for injecting large amounts of epoxy, laying a lengthy bead of epoxy or making fillets. Suitable for refilling until epoxy cures. For use wit...

Sika Primer-215 is a transparent, pale yellow liquid of low viscosity that dries by reaction with atmospheric moisture. It is used to prime various...

Sika Primer-215 is a transparent, pale yellow liquid of low viscosity that dries by reaction with atmospheric moisture. It is used to prime various...

Aluminium, Steel, Fiberglass, ABS & PVC Primer   Sika Primer 210T is a one component, general purpose, fast curing primer that is used to impro...

Primer for Acrylics and Polycarbonates.   Sika® Primer-209 D is a black, moisture-curing low viscosity primer specifically formulated for the treat...

Sika® Primer-207 is used to improve the adhesion of Sika® adhesives on a very broad array of substrates, such as float glass, ceramic-coated glass,...

Used exclusively for the caulking of joints in the traditional timber strip decking in boat and yacht building. It is non-corrosive, resistant to U...

Primer for Fiberglass and certain metals. Sika® Primer-206 G+P is used to improve adhesion on substrates such as float glass, ceramic-coated glass,...

Improves adhesion and gives a more weather resistant bond or seal on a variety of substrates: metals, many plastics & paints. Cleaner

THE STRONG VERSATILE MARITIME SEALANT  Simple and safe application Long open time Wide adhesion range  Sikaflex®-291i is a multi purpose one-comp...

Resistant to weathering, saltwater, and stresses caused by joint movement. Seals between mechanically fastened joints on wood, fiberglass, metal an...

Talc is a white to greyish-white fine powder which is made from finely ground talc, an extremely soft mineral compound composed of magnesium silica...

406 Colloidal Silica is a thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. ...

For use when epoxy must fill a void and provide extremely high strength and resistance to cracking (i.e. structural filleting, bonding of hardware,...

When mixed with your epoxy Phenolic Microballoons can be used as a fairing or filleting compound. These microballoons are a low density, light weig...

405 Filleting Blend Adhesive Filler is a strong, wood-toned epoxy filler. Add it to your epoxy mix when making epoxy joints and fillets on naturall...

Hollow reddish brown spheres used to make light weight fairing & filleting compounds. Good sanding feather edge sanding properties. Slightly be...

Thin glass fibers chopped to 1/4” lengths. Chopped Strand adds strength and gap filling to any mixture of fillers and resin. This can be added to ...

These are ground glass fibers that add moderate strength when added to resin. Shorter than Chopped Strand, they make a fiberous jelly-like product,...

Non abrasive paint additive to produce anti skid decks.  When mixed with epoxy, latex or oil-based paints, stains, or sealers, it creates a skid-re...

While WEST SYSTEM Epoxy creates an excellent moisture barrier by itself, 422 Barrier Coat Additive is a proprietary blend designed to further impro...