Epoxy, Polyester and Adhesives

USED FOR:  Thinning Gelcoat Polyester and Epoxy Resins Cleaning, Degreasing, Dewaxing, Tools, Fiberglass and Epoxy Surfaces May damage Paint, Var...

209 Extra Slow Hardener is formulated for use with WEST SYSTEM Brand 105 Resin for general coating and bonding applications in extremely warm and/o...

105 Resin is the base material of the WEST SYSTEM family of products, on which all of the WEST SYSTEM compounds are built. The resin is a clear, p...

E.A.S.T. System Epoxy has been specifically formulated for Boatbuilding, by Professional Boatbuilders! Its special formulation gives E.A.S.T. Syst...

E.A.S.T. System Epoxy has been specifically formulated for Boatbuilding, by Professional Boatbuilders! Its special formulation gives E.A.S.T. Syst...

Ark Epoxy Resin Low viscosity water clear 2 to 1 ratio system with fast and slow hardeners.  Use for waterproofing, fiberglassing, gluing and filli...

ARK COMPOSITES EPOXY RESIN 2:1 RATIO CLEAR NO BLUSH LOW VISCOSITY SYSTEM USE TO:                 Coat and waterproof wood, metal, most porous surfa...

423 Graphite Powder is a fine black powder that can be mixed with WEST SYSTEM epoxy to produce a low-friction exterior coating with increased scuff...

Aqua Zone is a two-part Epoxy Putty with the ability to cure above or below the waterline. With a 1:1 mix ratio, this versatile repair putty is a m...

The ultimate High-Gloss surface primer for wood, MDF, tooling board and composite plugs, patterns and models. Unique air-cure technology for fast c...

Styrene is the recommended thinner when using polyester and vinyl ester resins and gel coats. All polyester and vinyl ester resins contain styrene ...

Marine Tex® epoxy systems repair, bond and fill fiberglass, aluminum, plastics such as PVC, ABS, polyethylene (Starboard® Marine Building Sheet), i...

MAS Calibrated Resin Pump Set Contains both the 8cc and 4cc pumps. For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size container...

Pumps for the East System 5:1 resin. For East System Pump instructions click here

 ASSEMBLY Push extension tube firmly into the bottom of the BLUE DOT pump, this is the ARK Resin Pump.  Hold the pump against the side  of the resi...

3M Lightweight Body Filler comes in a creamy formula that is easy to mix, spread and sand. Manufactured with only the highest quality ingredients, ...

Details Excellent bond strength Easy to spread Fast-curing Premixed 3M™ Marine High Strength Repair Filler is a high performance reinforced f...

Blended with gelcoats for gelcoat repairs; blended with tooling gelcoats to upgrade mold surfaces. Low Porosity---when  used for repairs, blending ...

PVA (Poly Vinyl Alcohol) Provides a very compatible and reliable release barrier for polyester, vinyl ester and epoxy composites. Mold release agen...

Carnauba Paste Wax PRO® Yellow Wax™ is a favorite among professionals and automotive connoisseurs who insist on the highest quality final finishing...

A unique blend of glaze and sealers in a liquid wax base emulsion to seal new or reconditioned fiberglass molds prior to application of TR-100 seri...

Expansion Rate: 5 times; 1 Liter will expand to approximately 300 in3 High-density 12 lb cubic ft, cures in 20 minutes. Closed cells, will not abso...

A long lasting, permanently flexible marine polysulfide sealant which can be sanded, painted***, and used above and below the waterline. Tack-free ...

For CG-5