Lonseal Lonwood Marine Flooring Walnut and Holly 6 Ft Wide

Artfully blending the distinguished look of strip-wood decks with the superior durability of Lonseal's resilient sheets, Lonwood marine flooring brings elegant wood-grain aesthetics to your ship or vehicle interiors with greater economy and simpler upkeep.

Specifications:

• Roll Width: 6 Feet (1830 mm)
• Roll Length: 60 Feet(18 m)
• Thickness: 80 mil (2.0 mm)

Features:

• Lonwood Marine Flooring is a resilient sheet vinyl flooring solution with an interesting texture that mirrors the look of natural wood grains
• Excellent for small and large marine vessel interiors where design parameters call for a high- performance, sophisticated flooring solution
• Excellent for interior, retail, commercial, or institutional use where design parameters call for a high performance, sophisticated flooring solution
• Suitable Substrates Subject to Lonseal's Technical Manual for Interior Products:
  • Concrete (All grade levels), underlayment grade plywood, metal, and terrazzo
• Composition:
  • Constructed in multiple layers and embossed with distinctive wood grains
  • Lonwood Marine Flooring is composed of multiple layers of polyvinyl chloride resin, plasticizers, fillers, and pigments
  • With an embossed wood-grain texture, the co-calendared wear layer is formulated to provide maximum resistance to foot traffic in most commercial and healthcare applications
  • The middle layer provides dimensional stability, sound-absorbing properties, and resiliency under foot
  • The backing layer provides strength and stability of the flooring and enhances the bonding strength of the adhesive
• Green Features:
  • Over 35% pre consumer recycled content
  • Toward LEED (MR 4.1, MR 4.2)
  • EQ 4.1: Low VOC Adhesive
• Standard Sizes
  • Nominal thickness: .058" (1.9 mm)
  • Wear layer thickness: .011" (0.3 m

Technical Data:

• Applicable Standards
  • Type: I
  • Grade: I
  • Backing: Class B
  • Conforms with ASTM F 1303
• Coefficient of Friction (COF):
  • (ASTM C 1028) Surpasses ADA
    guidelines
• Critical Radiant Flux:
  • (ASTM E 648) Class 1 per NFPA Life
    Safety Code 101
• Smoke Density:
  • (ASTM E 662/NFPA 258)
• Abrasion Resistance:
  • (ASTM D 3884)
    Net Weight Loss after 1000 revolutions: 0.5%
• Static Load Limit:
  • (ASTM F 970) Residual compression - after exposure to a load of 500 lbs./24 hr.- .005"
• Flexibility:
  • (ASTM F 137) Passes
• Chemical Resistance:
  • No Change:
    • 5% Ammonia
    • 5% Acetic Acid
    • 70% Isopropyl Alcohol
    • 5% Sodium Hydroxide
    • 5% Hydrochloric Acid
    • Mineral Oil
    • Gasoline
    • Bleach
    • Sulfuric Acid
    • Kerosene
    • Olive Oil
  • Surface Attack and Slight Change:
    • 5% Phenol

Storage: Store all surfacing materials in a clean, dry environment with unopened rolls standing on end. Please refer to Lonseal's Technical Manual for Interior Products for detailed information.

Adhesives and Seam Treatment: Seams are chemical and heat weldable

• No. 300: Epoxy For extreme service requirements
• No. 400: Contact Adhesive for Vertical Installations
• Lonseal Double Face Tape Under seams
• Lonsealer: Chemical seam sealer
  

Maintenance:

• This unique wear layer provides low maintenance that requires only dust and wet mopping
• For interim maintenance, we recommend use of Lonseal"s maintenance products: Lonbuff and Loncare