Skip to content
Can’t find what you’re looking for? Visit our legacy site
Can’t find what you’re looking for? Visit our legacy site

Lonseal Lonwood Marine Flooring Mahogany and Holly 6 Ft Wide

by Lonseal
Original price $95.26 - Original price $95.26
Original price
$95.26 - $95.26
Current price $95.26

Artfully blending the distinguished look of strip-wood decks with the superior durability of Lonseal's resilient sheets, Lonwood marine flooring brings elegant wood-grain aesthetics to your ship or vehicle interiors with greater economy and simpler upkeep.


  • Roll Width: 6 Feet (1830 mm)
  • Roll Length: 60 Feet(18 m)
  • Thickness: 80 mil (2.0 mm)


  • Lonwood Marine Flooring is a resilient sheet vinyl flooring solution with an interesting texture that mirrors the look of natural wood grains
  • Excellent for small and large marine vessel interiors where design parameters call for a high- performance, sophisticated flooring solution
  • Excellent for interior, retail, commercial, or institutional use where design parameters call for a high performance, sophisticated flooring solution
  • Suitable Substrates Subject to Lonseal's Technical Manual for Interior Products:
    • Concrete (All grade levels), underlayment grade plywood, metal, and terrazzo
  • Composition:
    • Constructed in multiple layers and embossed with distinctive wood grains
    • Lonwood Marine Flooring is composed of multiple layers of polyvinyl chloride resin, plasticizers, fillers, and pigments
    • With an embossed wood-grain texture, the co-calendared wear layer is formulated to provide maximum resistance to foot traffic in most commercial and healthcare applications
    • The middle layer provides dimensional stability, sound-absorbing properties, and resiliency under foot
    • The backing layer provides strength and stability of the flooring and enhances the bonding strength of the adhesive
  • Green Features:
    • Over 35% pre consumer recycled content
    • Toward LEED (MR 4.1, MR 4.2)
    • EQ 4.1: Low VOC Adhesive
  • Standard Sizes
    • Nominal thickness: .058" (1.9 mm)
    • Wear layer thickness: .011" (0.3 m

Technical Data:

  • Applicable Standards
    • Type: I
    • Grade: I
    • Backing: Class B
    • Conforms with ASTM F 1303
  • Coefficient of Friction (COF):
    • (ASTM C 1028) Surpasses ADA
  • Critical Radiant Flux:
    • (ASTM E 648) Class 1 per NFPA Life
      Safety Code 101
  • Smoke Density:
    • (ASTM E 662/NFPA 258)
  • Abrasion Resistance:
    • (ASTM D 3884)
      Net Weight Loss after 1000 revolutions: 0.5%
  • Static Load Limit:
    • (ASTM F 970) Residual compression - after exposure to a load of 500 lbs./24 hr.- .005"
  • Flexibility:
    • (ASTM F 137) Passes
  • Chemical Resistance:
    • No Change:
      • 5% Ammonia
      • 5% Acetic Acid
      • 70% Isopropyl Alcohol
      • 5% Sodium Hydroxide
      • 5% Hydrochloric Acid
      • Mineral Oil
      • Gasoline
      • Bleach
      • Sulfuric Acid
      • Kerosene
      • Olive Oil
    • Surface Attack and Slight Change:
      • 5% Phenol

Storage: Store all surfacing materials in a clean, dry environment with unopened rolls standing on end. Please refer to Lonseal's Technical Manual for Interior Products for detailed information.

Adhesives and Seam Treatment: Seams are chemical and heat weldable

  • No. 300: Epoxy For extreme service requirements
  • No. 400: Contact Adhesive for Vertical Installations
  • Lonseal Double Face Tape Under seams
  • Lonsealer: Chemical seam sealer


  • This unique wear layer provides low maintenance that requires only dust and wet mopping
  • For interim maintenance, we recommend use of Lonseal"s maintenance products: Lonbuff and Loncare