System Three Epoxy

SUBMARINE UNDERWATER EPOXY Submarine is a general use, epoxy paste compound that bonds to wet surfaces by displacing water from the substrate....

Quick Cure 5Quick Cure-5 is the standard quick setting "five minute epoxy" system. Mix at a 1:1 by volume ratio. Quick Cure is ideal for all small ...

Quick Cure 15Quick Cure-15 is the standard quick setting "fifteen minute epoxy" system. Mix at a 1:1 by volume ratio. Quick Cure is ideal for all s...

SculpWood Putty is a one of four components making up the EndRot system. It’s a nonshrinking, two-part epoxy putty compound ideal for filling voi...

SculpWood Max is a reinforced, high-compressive strength, two-part epoxy putty compound. It has 4X the compressive strength of standard SculpWoo...

RotFix is an ultra-low viscosity epoxy that penetrates deeply into soft, punky wood substrates. Unlike many popular “penetrating” epoxies, RotFix...

MetlWeld is a super tough epoxy adhesive designed to bond dissimilar materials such as steel, wood, and rubber. MetlWeld exhibits excellent elastic...

Exhibits outstanding adhesion on a wide variety of materials May be used to glue damp wood provided T-88 is worked well into the surface Available...

Borate Rods are an easy, low-cost decay protection and prevention system for wood. They have an appearance similar to glass rods and are available ...

EndRot Borate Powder is an insecticide, termiticide and fungicide concentrate for the control of wood destroying insects and rot. It is a very vers...

Why replace when you can restore? Rot is a fungus and it can spread quickly, infecting, and then destroying sound wood in its path. Replacement can...

Blade Pro epoxy adhesive is a two-component, high-performance glue designed specifically for the knife maker.  This state-of-the-art adhesive forms...

SilverTip Laminating Resin is a medium-low viscosity, liquid epoxy resin system that has been optimized for coating and reinforcing fabric saturati...

SilverTip Epoxy is a medium-low viscosity, liquid epoxy resin system that has been optimized for coating and reinforcing fabric saturation in wood-...

S-1 is a two-part transparent epoxy sealer. Intended for marine use, it will act as a waterproof and chemical resistant primer on a variety of subs...

SilverTip Epoxy is a medium-low viscosity, liquid epoxy resin system that has been optimized for coating and reinforcing fabric saturation in wood-...

QuikFair is a lightweight, microballoon-filled, fast-curing two-part epoxy fairing putty with excellent moisture resistance. The two color-coded pa...

MirrorCoat is a pourable, self-leveling bar and tabletop coating. It works well on many surfaces such as wood, ceramics, plaster, masonry and some ...

SB-112 is a two part epoxy system that excels as a primer/tie coat for polyester resin materials. SB-112’s surface does not inhibit the curing of...

EZ-Fillet is a wood flour-filled two-part putty specifically designed for stitch-and-glue wooden boat construction. Its ketchup-like, self-leveling...

Cold Cure is a blush resistant, two-part epoxy laminating and coating resin that excels in foul weather conditions.  It cures in cold, damp, and hu...

SculpWood Paste is a creamy smooth, two-part finishing paste compound. SculpWood Paste is non-shrinking and will not crack like most exterior fi...

For over 35 years, G-2 has been the best epoxy glue for oily, acidic hardwoods like teak and other precious tropical woods. Use it for gluing oak a...

T-88 is a two-part, high-performance structural epoxy adhesive. Use T-88 in woodworking and marine applications. It exhibits outstanding adhesion...