Glen L Plans and Patterns

Product Specifications Hull weight (approx.): 125 lbs. Hull type: Vee bottom with flaring sides to act as anti-trip chines, developed for sheet pl...

Product Specifications Length overall: 16'2li> Beam: 7'2" Draft: 2'6" Displacement: 3300 lbs. Suggested power range: 5-20HP Speed within HP ran...

Characteristics Length overall 10'-2" Beam 5'-0" Hull depth 12" Average passengers 1 Hull weight (approx.): 100 lbs. Hull type: Three-point hydropl...

This V-bottom dinghy is akin to the renown Sabot, using the identical rig and rudder, and fitted with a daggerboard for the Sail Version. It’s also...

Length overall 9'7"Beam 4'8"Hull depth amidships 19-1/2"  Boat weight:  100 lbs.  Sail area:  59 sq.ft.  Average passengers 2-3  Power (optional ma...

Model boat building is fun and very instructive if you intend building a full size craft. The RC MODEL X-1 uses the same principals of FAST-G (Fold...

Characteristics 12' 14' Length overall 11'-5" 13'-5" Beam 5'-0" 5'-0" Hull depth forward 27" 27" Hull depth aft 1'-4" 1'-4" Average passengers 1-3 ...

Characteristics 12' 14' Length overall 11'-5" 13'-5" Beam 5'-0" 5'-0" Hull depth forward 27" 27" Hull depth aft 1'-4" 1'-4" Average passengers 1-3 ...

Characteristics Length overall 8'-0" Beam 4'-0" Hull depth 7 1/2" Cockpit size 5'-6" x 32" Hull weight (approx.) 70 lbs. Average passengers 1 Hull ...

Yes, the FOLD UP does fold up into a flat bundle, 10'3" x 25" x 10".How many times have you wished you could carry a boat to the water? Perhaps the...

DYNO Mite is intended for a short or long shaft transom mounted outboard motor set in a self bailing motorwell. The hull features a generous 12 deg...

Characteristics Length overall 11'-1" Beam 5'-6" Hull depth 18" Depth to coaming 24" Typical passengers 1-2 Hull weight (approx.) 125 lbs. Hull typ...

Of our easiest and quickest designs to build, DRIFT PRAMS let you reach fishing holes bigger boats must pass by. While functionally similar to larg...

Of our easiest and quickest designs to build, DRIFT PRAMS let you reach fishing holes bigger boats must pass by. While functionally similar to larg...

Product Characteristics Length: 9'-0" Beam: 4'-5" Hull depth: 12 1/4" Hull weight (approx.): 85 lbs. Racing weight min. (boat, driver, & motor...

Length 13'-2", Beam 5'-2", Depth amidships 16", Hull Weight 135lbs. Power outboard motor to 40HP. Hull type: high speed monoplane bottom with wide,...

CLASS A-B racing runabout was designed to fit into APBA racing classes that are no longer active. It's not a toy, but a full-fledged racing boat. S...

The BULL'S-EYE utilizes Fast-G Stitch and Glue construction; the plywood planking is cut from standard 4' x 8' panels, assembled flat on the ground...